300-510 SPRI Practice Exam Are Recommend To Prepare For CCNP Service Provider Certification

Regina2021-08-05T08:44:59+00:00

By Regina CCNP Service Provider, Cisco, Free Questions Online 300-510, 300-510 free questions, 300-510 practice exam

Earning CCNP Service Provider certification requires to pass a core exam and a concertration exam. There are three CCNP Service Provider concertration exams, one of them is 300-510 Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) exam. If you are the one who is preparing for 300-510 SPRI exam, we recommend to choose our Cisco 300-510 SPRI practice exam as the preparation materials. Cisco certification 300-510 practice exam come with 103 exam questions, and also, all the answers have been verified. We guarantee that 300-510 practice exam cover the exam objectives of implementing service provider advanced routing technologies. Come to get the Cisco 300-510 SPRI practice exam to learn real 300-510 exam well.

Read CCNP Service Provider 300-510 SPRI Free Questions Online To Check The Quality

Page 1 of 3

1. Refer to the exhibit.

A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired.

Where should the soft preemption be applied to solve the issue?

on the tail-end device for tunnel-te1 192.168.0.7

under the tunnel-te1 interface on PE1

explicitly for tunnel-te 1 under the Cisco MPLS TE configuration mode after the timeout setting

Under the interface Loopback0 necessary for this deployment type.

2. Refer to the exhibits.

A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1.

Which interface and label path should the operator investigate next?

PE1 C Gi0/0/0/3 - forwarding label 24002

PE1 C Gi0/0/0/2 - forwarding label 24002

PE1 C Gi0/0/0/3 - forwarding label 24001

PE1 - Gi0/0/0/2 - forwarding label 24001

3. 168.39.0/24) in area 2 to stop the flooding of all the customer routes. While checking

the routing table of R2, the engineer noticed that R1 is still sending only specific routes to R2.

Which configuration should the engineer apply on R1 to summarize routes?

Option A

Option B

Option C

Option D

4. A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances.

Which description of the possible cause of issues in the routing domain is true?

The same interface cannot be advertised in two different IS-IS instances

The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate

The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship

The interface mode ip router is-is command was not included in the script

5. Refer to the exhibit.

Which statement about this configuration is true?

Router 1 sends and receives multiple best paths from neighbor 192.168.1.1

Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes

Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS

Router 1 receives only the best path from neighbor 192.168.1.1

6. Refer to the exhibit.

All routers on this network have been configured with P1M-SM and R1 is the rendezvous point However, when asymmetric routing is implemented to modify link usage the network begins to drop certain multicast traffic.

Which action corrects the problem?

Place the routes affected by asymmetric routing in a VR

Remove the asymmetric routing and use spanning tree to manage link usage.

Add a static Mroute for routes that are failing.

Configure the routers to use PIM-DM instead of PIM-S

7. In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?

The receiver explicitly requests its desired traffic from the RP on the shared tree.

The receiver explicitly requests traffic from a single source, which responds by forwarding all traffic.

The RP on the shared tree floods traffic out of all PIM configured interfaces.

The receiver explicitly requests traffic from each desired source, which responds by sending all traffic.

8. Refer to the exhibit.

Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?

MED

local preference

origin

weight

9. Refer to the exhibit.

While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1.

How should the engineer solve the issue?

Set up a priority different than 0 in the interface.

Modify the router ID to be the interface IP on the serial.

Modify the IP address or mask of the interface to a valid one.

Set the network type in S1/0 to point-to-point.

10. DRAG DROP

An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network.

Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)

Page 2 of 3

11. An engineer is troubleshooting slow performance issues on a customer’s network after the last multicast configuration change was applied on it While checking the running configuration on the router the engineer notices there are many ip igmp join-group commands applied on several interfaces of the router which caused the high CPU utilization usage.

What action must the engineer take to solve this issue?

Configure ip igmp static-group command on all interfaces

Remove ip igmp join-group command on all unnecessary interfaces

Configure all router interfaces to be process-switched by increasing the query interval

Remove unnecessary members from the IGMP group

12. Refer to the exhibit.

P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other.

Which two actions fix the issue? (Choose two.)

Change MD5 to HMAC-SHA1-12

Change MD5 to HMAC-ESP

Change MD5 to SHA-1

Change MD5 to HMAC-MD5

Remove the send and accept lifetime under key 1

13. Which cost is the default when redistributing routes from BGP to OSPF?

infinite

automatic

14. Refer to the exhibit.

Change HMAC-MD5 to HMAC-SHA1-20

Configure the send and accept lifetime under key 1

Change HMAC-MD5 to MD5

Change HMAC-MD5 to HMAC-SHA1-12

15. Refer to the exhibit.

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.

Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

A)

Option A

Option B

Option C

Option D

16. Refer to the exhibit.

How are packets directed through the data plane when SRv6 is implemented?

An ordered list of segments is encoded in a routing extension header

The MPLS data plane is used to push labels onto IGP routes

A stack of labels represents an ordered list of segments

The packet is encapsulated with a header and trailer encoding the ordered list of segments

17. Refer to the exhibit.

Routers within the cluster are not receiving the desired prefixes.

What must be done to fix the issue?

Clients in that cluster must have full mesh connectivity between eBGP peers.

No client-to-client must be disabled.

Clients in that cluster must have full mesh connectivity between iBGP peers.

No client-to-client reflection must be enabled.

18. Which command is used to enable BIDIR-PIM under global configuration mode for Cisco IOS XE Software?

ip pim bidir ip

multicast-routing

ipv4 pim bidir-enable

Ip pim bidlr-enable

19. Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3.

Which mechanism should the engineer apply in order to steer the traffic correctly?

The MED attribute can be applied on R2 to influence R1 to use it as the primary path.

The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.

The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.

The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.

20. What is the characteristic of enabling segment routing for IGPs?

Segment routing must first be enabled under the routing process and then globally.

Segment routing must first be enabled globally and then under the routing process.

Segment routing must be enabled only globally.

Segment routing must be enabled only under the routing process.

Page 3 of 3

21. Refer to the exhibit.

Router 1 is connected to router 2 on interface TenGigE0/1.

Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?

TenGigE0/1 interface provides the alternate path

A backup path must be statically installed

TenGigE0/2 interface provides the alternate path

A primary path must be manually installed

22. Refer to the exhibit.

There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up.

Which configuration must be applied to router R2 to correct the problem?

Option A

Option B

Option C

Option D

23. What are three requirements for a static IPv6-in-IPv4 tunnel? (Choose three.)

A static IPv6 address must be configured.

A dynamic IPv6 address must be configured.

Cisco Express Forwarding must be enabled.

Each tunnel endpoint must support IPv4 and IPv6.

A static IPv4 address must be configured.

A dynamic IPv4 address must be configured.

24. Which expression, when used with the as-path-set command, matches the AS path attribute of the route?

neighbor-is

dfa-regtex

ios-regex

Length

25. Which two differences should be considered when deciding whether to implement to implement routing policies or route maps? (Choose two.)

Sequences are added after implementing a route map, but routing policies must be reconfigured when change is needed.

Route maps are implemented using hierarchical policies, but routing policies must be implemented sequentially.

Route maps require an explicit deny at the end of the sequence, but routing policies have an implicit deny at the end of the program.

Route policies require sequence numbers, but route maps are implemented without sequencing.

Route maps are supported in Cisco 10S Software and routing policies are supported in Cisco IOS XR Software.

26. What are two differences between OSPF and IS-IS? (Choose two.)

OSPF is a link-state routing protocol, and IS-IS is a distance-vector routing protocol.

OSPF uses a router ID to identify a router, and IS-IS uses a system I

OSPF elects a DR and a BDR, and IS-IS elects a DI

Unlike OSP

IS-IS supports virtual links.

Unlike IS-IS routers, an OSPF router belongs to only one area in addition to the backbone area.

27. Refer to the exhibit.

A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream.

Which action must the engineer take to correct the problem?

Configure IP PIM SSM and IGMP version 2 under interface GigatxtEthernet 1/0/1 on R3

Configure IGMP version 3 under interface GigabitEthernet 1/(V1 on R3

Remove IP PIM SSM and IGMP from interface GigaEthernet 1/0/1 on R3 and configure under global configuration

Remove IP PIM SSM from the global configuration on R3 and configure it under the GigabitEthernet 1/0/1 interface

28. Which statement about BFD on Cisco IOS XR Software is true?

Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.

Cisco IOS XR Software does not support BFD multihop for IPv4.

Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.

BFD is not compatible between Cisco IOS XR and Cisco IOS Software.

Welcome To Choose Required IT Certification Exams Online

300-510 SPRI Practice Exam Are Recommend To Prepare For CCNP Service Provider Certification

Read CCNP Service Provider 300-510 SPRI Free Questions Online To Check The Quality

Author