Choose The Updated 300-425 Exam Questions To Prepare For CCNP Enterprise ENWLSD Exam Well

Regina2021-12-18T02:53:22+00:00

By Regina CCNP Enterprise, Cisco, Free Questions Online 300-425, 300-425 exam questions, 300-425 free questions, 300-425 practice exam

Come to ITExamShop to choose the most updated 300-425 exam questions to prepare for Designing Cisco Enterprise Wireless Networks (ENWLSD) certification exam well. Cisco 300-425 exam questions presented by ITExamShop, who have updated the Cisco 300-425 exam questions and answers based on the latest exam topics, could be the finest preparation materials which will assist you to in acing the actual 300-425 ENWLSD exam in initial try because the 300-425 updated practice exam possess the 100% genuine exam questions.

Here, we have 300-425 free questions online for checking before getting the updated materials.

Page 1 of 2

1. Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?

PDAs

jammers

smartphones

printers

2. A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network.

Which type of wireless architecture is being used?

unified deployment

autonomous deployment

centralized deployment

distributed deployment

3. Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?

It is an IPsec tunnel with control path only.

It is a CAPWAP tunnel with data path only.

It is a CAPWAP tunnel with control path and data path.

It is an IPsec tunnel with control path and data path.

4. A customer celled with a requirement that internal clients must be on different subnets depending on the building they are in, AH access points are operating in local mode and will not be modified, and this is a single controller solution.

Which design approach creates the desired result?

Create an SSID, place it to the desired VLAN under WLANs, and configure 802 lx in ISE to assign the correct VLAN based on the SSID from which the client is authenticating.

Create FlexConnecI groups, place the access points in. and sat the correct VLAN to SSID mapping based on location.

Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.

Create mobility anchors for the SSID, and on the controller under the internal SSI

create a foreign map to the desired VLAN based on location.

5. Refer to the exhibit.

Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

It presents the recommended number of APs for the selected coverage area based on the selections made.

Planning mode requires a special license in Cisco Prime Infrastructure.

It shows the map editor feature in Cisco Prime Infrastructure.

Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.

It shows the planning mode feature in Cisco Prime Infrastructure.

6. Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned.

By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?

controller with the most available AP free license capacity

controller with the lowest percent of associated APs per license capacity

controller with the least CPU utilization over the last reporting period

controller with the least number of associated APs

7. APs in a remote office recently have been converted from local mode to FlexConnect to take advantage of the local switching. After the change, remote wireless users report voice quality issues and bad quality on wireless IP phones while roaming. A debug is performed, and it is noticed that the 802.11r Fast Transition is not working as expected, like on local mode AP, though the same WLAN configuration is in place.

What is the cause of the issue regarding the FlexConnect APs?

They do not support 802.11r F

They must be added into AP groups along with a common RF profile.

They must be in a FlexConnect group to support 802.11r F

They must be added to AP groups to support fast roaming methods.

8. Refer to the exhibit.

What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?

aesthetics

transmit power considerations

antenna gain

power supply considerations

9. Refer to the exhibit.

A client roams between two APs that are registered to two different controllers, where

each controller has an interface in the client subnet. Both controllers are running AireOS.

Which scenario explains the client roaming behavior?

Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from the original controller to the new controller.

Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not moved from the original controller to the new controller.

Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the new controller.

Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled from the original controller to the new controller.

10. A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs.

Which strategy will reduce the negative impact of the design?

Resurvey and adjust the design.

Deploy unsurveyed access points to the design.

Deploy the specified access points per area type.

Increase the Tx power on incorrectly surveyed access points.

Page 2 of 2

11. What causes the most signal attenuation, based on the wireless design tools?

cinder block wall

metal door

glass wall

office window

12. A customer has multiple WLCs running N+1 redundancy with APs equally distributed. Only one WLC is a designated backup for all other WLCs so the customer must ensure that the most critical APs remain registered or get priority over other APs in case of a WLC failure. However, the customer notices on WLC failure that some critical APs remain unregistered.

What needs to be addressed in the design?

AP fallback is not enabled on the backup WL

AP failover priority is not enabled globally on the backup WL

AP failover priority is not enabled globally on the failed WL

AP fallback is not enabled on the failed WL

13. 1.During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?

WLC

CP2

CP1

14. An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?

one controller per continent

one controller per country code

redundant controllers in the most restrictive regulatory domain

redundant controllers in the least restrictive regulatory domain

Welcome To Choose Required IT Certification Exams Online

Choose The Updated 300-425 Exam Questions To Prepare For CCNP Enterprise ENWLSD Exam Well

Here, we have 300-425 free questions online for checking before getting the updated materials.

Author