Real HCIP-Access V2.5 H35-211_V2.5 Exam Questions – Great Online Resource To Pass H35-211_V2.5 Exam [2022]

When you make a clear random to prepare for H35-211_V2.5 HCIP-Access V2.5 certification exam well, then you can come to ITExamShop to choose the real H35-211_V2.5 exam questions as your learning materials. H35-211_V2.5 exam questions of ITExamShop have been verified by the experienced team as the great online resource providing you with pdf file and testing engine to study all the 312 questions and answers well. More, it is recommended to completed HCIA-Access V2.5 H35-210_V2.5 exam in advance, you can purchase both H35-210_V2.5 exam questions and H35-211_V2.5 preparation materials at ITExamShop.

Check H35-211_V2.5 Free Questions First Before Getting Real H35-211_V2.5 Exam Questions

Page 1 of 2

 Loading...

1. For the PITP P mode, the VBAS request message is encapsulated in a PADS message and sent to the OLT.

TRUE

FALSE

Launch demo modal

 Loading...

2. The double-rate three-color marking (TrTCM) algorithm can guarantee the basic bandwidth (CIR) of users, and allow users to obtain additional bandwidth services (PIR) when the network is idle, improving the utilization of network resources.

TRUE

FALSE

Launch demo modal

 Loading...

3. During the SIP voice service provisioning process, what is the port corresponding to the default VLAN on the user side of the ONT?

IPHOST

ETH

FE

POST

Launch demo modal

 Loading...

4. GPON only supports downlink AES-128 encryption, XG-PON supports bidirectional AES-128 encryption

TRUE

FALSE

Launch demo modal

 Loading...

5. When the ONU is replaced in the eSight system, which of the following options can be used to reselect the ONU?

ONU SN

ONU ID

ONU MAC

ONU IP

Launch demo modal

 Loading...

6. Which of the following descriptions about the type of Ethernet link aggregation group is wrong?

When all connected devices support the LACP protocol, it is recommended to use LACP aggregation

Static aggregation needs to run the LACP protocol

The aggregation group types supported by the device include manual aggregation and static aggregation

Manual aggregation needs to run the LACP protocol

Launch demo modal

 Loading...

7. In the Type C protection mode, which switching type is not supported?

Forced switching

Semi-automatic switching

Manual switching

Automatic switching

Launch demo modal

 Loading...

8. In the FTTX network, which of the following principles is wrong when planning data for broadband services?

If the outer labels of different PON ports are different, the inner labels can be the same

The same PON port is marked with different outer labels for different services

If the outer labels of different PON ports are the same, the inner labels cannot be the same

The network management should use QinQ VLAN

Launch demo modal

 Loading...

9. In the GPON system, Huawei recommends not to use the splitting above level 2. Which of the following networking is wrong?

First-order splitting 1:2, second-order splitting 1:8

First-order splitting 1:8, second-order splitting 1:8

First-order splitting 1:16, second-order splitting 1:16

First-order splitting 1:2, second-order splitting 1:16

Launch demo modal

 Loading...

10. After the ONU is powered on, the unconfigured ONU cannot be automatically discovered on the OLT. What is the reason for the impossibility?

The actual distance from the ONU to the OLT is outside the range of the distance compensation distance configured by the OLT

ONU hardware failure

Unplanned ONU ID

There is a rogue ONU, which interferes with other ONU and cannot work normally

Launch demo modal

Page 2 of 2

 Loading...

11. Which of the following descriptions is wrong about how Time delay mode works?

From the switching relationship, the access device is in the "active" position in the switching of the Time delay protection group. After detecting the fault of the working port, it immediately starts the switching according to the detection result.

The links in the protection group are in traffic load balancing mode

After the OLT detects the failure of the working port, it will not immediately switch the service to the protection link.

Immediately open the protection port when the access device is switched

Launch demo modal

 Loading...