Actual 350-401 ENCOR Exam Questions [2022] - Updated 350-401 Practice Exam For Good Preparation

Actual 350-401 ENCOR Exam Questions [2022] – Updated 350-401 Practice Exam For Good Preparation

Regina2022-02-12T03:20:25+00:00

By Regina CCNP Enterprise, Cisco, Free Questions Online 350-401, 350-401 ENCOR, 350-401 exam questions, 350-401 Free Questions, 350-401 Practice Exam

To pass 350-401 Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) certification exam, most candidates decide to choose actual 350-401 ENCOR exam questions online as the preparation materials as the most ideal way to prepare for Cisco 350-401 exam well. Updated 350-401 practice exam of ITExamShop have been completed recently with 530 practice exam questions and answers to ensure that you can learn 350-401 exam well and pass Cisco 350-401 ENCOR exam smoothly. We have verified the updated 350-401 exam questions and answers, it is highly recommended to read ITExamShop 350-401 exam questions with the pdf file and testing engine for good preparation.

Before Buying Updated 350-401 Practice Exam, Check 350-401 Free Questions First

Page 1 of 4

1. Which entity is responsible for maintaining Layer 2 isolation between segments in a VXLAN environment?

switch fabric

host switch

VTEP

VNID

2. Which LISP infrastructure device provides connectivity between non-LISP sites and LISP sites by receiving non-LISP traffic with a LISP site destination?

PETR

PITR

map resolver

map server

3. Which controller is the single plane of management for Cisco SD-WAN?

vBond

vEdge

vSmart

vManage

4. DRAG DROP

Drag and drop the LISP components from the left onto the functions they perform on the right. Not all options are used.

5. What is the responsibility of a secondary WLC?

It shares the traffic load of the LAPs with the primary controller.

It avoids congestion on the primary controller by sharing the registration load on the LAPs.

It registers the LAPs if the primary controller fails.

It enables Layer 2 and Layer 3 roaming between Itself and the primary controller.

6. Which behavior can be expected when the HSRP version is changed from 1 to 2?

Each HSRP group reinitializes because the virtual MAC address has changed

No changes occur because version 1 and 2 use the same virtual MAC OUI

Each HSRP group reinitializes because the multicast address has changed

No changes occur because the standby router is upgraded before the active router

7. Which component handles the orchestration plane of the Cisco SD-WAN?

vBond

vSmart

vManage

WAN Edge

8. DRAGDROP

Drag and drop the descriptions from the left onto the correct QoS components on the right.

9. Refer to the exhibit.

Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?

R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0

R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#network 10.2.2.0 mask 255.255.255.0

R1(config)#router bgp 1 R1(config-router)#neighbor 192.168.10.2 remote-as 2 R1(config-router)#network 10.0.0.0 mask 255.0.0.0 R2(config)#router bgp 2 R2(config-router)#neighbor 192.168.10.1 remote-as 1 R2(config-router)#network 10.0.0.0 mask 255.0.0.0

R1(config)#router bgp 1 R1(config-router)#neighbor 10.2.2.2 remote-as 2 R1(config-router)#neighbor 10.2.2.2 update-source |o0 R1(config-router)#network 10.1.1.0 mask 255.255.255.0 R2(config)#router bgp 2 R2(config-router)#neighbor 10.1.1.1 remote-as 1 R2(config-router)#neighbor 10.1.1.1 update-source |o0 R2(config-router)#network 10.2.2.0 mask 255.255.255.0

10. In OSPF, which LSA type is responsible for pointing to the ASBR router?

type 1

type 2

type 3

type 4

Page 2 of 4

11. What are two device roles in Cisco SD-Access fabric ? (Choose two.)

core switch

vBond controller

edge node

access switch

border node

12. What are two benefits of virtualizing the server with the use of VMs in a data center environment? (Choose two.)

increased security

reduced rack space, power, and cooling requirements

reduced IP and MAC address requirements

speedy deployment

smaller Layer 2 domain

13. Refer to the exhibit.

Which type of antenna do the radiation patterns present?

Patch

Omnidirectional

Yagi

Dipole

14. Which statement about route targets is true when using VRF-Lite?

When BGP is configured, route targets are transmitted as BGP standard communities

Route targets control the import and export of routes into a customer routing table

Route targets allow customers to be assigned overlapping addresses

Route targets uniquely identify the customer routing table

15. What is the role of a fusion router in an SD-Access solution?

provides connectivity to external networks

acts as a DNS server

performs route leaking between user-defined virtual networks and shared services

provides additional forwarding capacity to the fabric

16. Refer to the exhibit.

Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?

VRF VPN_B

Default VRF

Management VRF

VRF VPN_A

17. Which two mechanisms are available to secure NTP? (Choose two.)

IP prefix list-based

IPsec

TACACS-based authentication

IP access list-based

Encrypted authentication

18. Refer to the exhibit.

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning-tree port-priority 32 command on G0/1 on SW2, but the port remains blocked.

Which command should be entered on the ports that are connected to Link2 to resolve the issue?

Enter spanning-tree port-priority 32 on SW1

Enter spanning-tree port-priority 224 on SW1

Enter spanning-tree port-priority 4 on SW2

Enter spanning-tree port-priority 64 on SW2

19. In an SD-WAN deployment, which action in the vSmart controller responsible for?

handle, maintain, and gather configuration and status for nodes within the SD-WAN fabric

onboard vEdge nodes into the SD-WAN fabric

gather telemetry data from yEdge routers

distribute policies that govern data forwarding performed within the SD-WAN fabric

20. Which QoS component alters a packet to change the way that traffic is treated in the network?

Marking

Classification

Shaping

Policing

Page 3 of 4

21. The following system log message is presented after a network administrator configures a GRE tunnel:

Why is Tunnel 0 disabled?

Because the tunnel cannot reach its tunnel destination

Because the best path to the tunnel destination is through the tunnel itself

Because dynamic routing is not enabled

Because the router cannot recursively identify its egress forwarding interface

22. Which statement explains why Type 1 hypervisor is considered more efficient than Type2 hypervisor?

Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS

Type 1 hypervisor enables other operating systems to run on it

Type 1 hypervisor relies on the existing OS of the host machine to access CPU, memory, storage, and network resources

Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques

23. How does the RIB differ from the FIB?

The RIB includes many routes to the same destination prefix. The FIB contains only the best route.

The FIB maintains network topologies and routing tables. The RIB is a list of routes to particular network destinations.

The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.

The FIB includes many routes a single destination. The RIB is the best route to a single destination.

24. An engineer is describing QoS to a client.

Which two facts apply to traffic policing? (Choose two.)

Policing adapts to network congestion by queuing excess traffic

Policing should be performed as close to the destination as possible

Policing drops traffic that exceeds the defined rate

Policing typically delays the traffic, rather than drops it

Policing should be performed as close to the source as possible

25. Which reason could cause an OSPF neighborship to be in the EXSTART/EXCHANGE state?

Mismatched OSPF network type

Mismatched areas

Mismatched MTU size

Mismatched OSPF link costs

26. Which benefit is offered by a cloud infrastructure deployment but is lacking in an on-premises deployment?

efficient scalability

virtualization

storage capacity

supported systems

27. Which statement about Cisco EAP-FAST is true?

It requires a client certificate.

It is an IETF standard.

It does not require a RADIUS server certificate.

It operates in transparent mode.

28. Where is radio resource management performed in a cisco SD-access wireless solution?

DNA Center

control plane node

wireless controller

Cisco CMX

29. What is the role of the vSmart controller in a Cisco SD-WAN environment?

It performs authentication andauthorization.

It manages the controlplane.

It is the centralized network managementsystem.

It manages the dataplane.

30. What is a Type 1 hypervisor?

runs directly on a physical server and depends on a previously installed operating system

runs directly on a physical server and includes its own operating system

runs on a virtual server and depends on an already installed operating system

run on a virtual server and includes its own operating system

Page 4 of 4

31. What is an emulated machine that has dedicated compute, memory, and storage resources and a fully installed operating system?

host

virtual machine

container

mainframe

32. In a three-tier hierarchical campus network design, which action is a design best-practice for the core layer?

provide QoS prioritization services such as marking, queueing, and classification for critical network traffic

provide advanced network security features such as 802. IX, DHCP snooping, VACLs, and port security

provide redundant Layer 3 point-to-point links between the core devices for more predictable and faster convergence

provide redundant aggregation for access layer devices and first-hop redundancy protocols such as VRRP

33. Which DNS lookup does an access point perform when attempting CAPWAP discovery?

CISCO-DNA-CONTROILLE

local

CAPWAP-CONTROLLE

local

CISCO-CONTROLLE

local

CISCO-CAPWAP-CONTROLLE

local

34. Refer to the exhibit.

MTU has been configured on the underlying physical topology, and no MTU command has been configured on the tunnel interfaces.

What happens when a 1500-byte IPv4 packet traverses the GRE tunnel from host X to host Y, assuming the DF bit is cleared?

The packet arrives on router C without fragmentation.

The packet is discarded on router A

The packet is discarded on router B

The packet arrives on router C fragmented.

35. Which statement about Cisco Express Forwarding is true?

It uses a fast cache that is maintained in a router data plane

It maintains two tables in the data plane the FIB and adjacency table

It makes forwarding decisions by a process that is scheduled through the IOS scheduler

The CPU of a router becomes directly involved with packet-switching decisions

Welcome To Choose Required IT Certification Exams Online

Actual 350-401 ENCOR Exam Questions [2022] – Updated 350-401 Practice Exam For Good Preparation

Before Buying Updated 350-401 Practice Exam, Check 350-401 Free Questions First

Author