Cisco CLCOR Exam 350-801 Practice Questions Updated (V19.02) To Be Your Good Preparation Materials

Regina2022-08-19T02:15:22+00:00

By Regina CCNP Collaboration, Cisco, Free Questions Online 350-801, 350-801 CLCOR, 350-801 practice questions

We have the updated information for your 350-801 Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) exam. We have updated the Cisco CLCOR exam 350-801 practice questions V19.02 to help you achieve success on the first attempt. If you wish to pass the Cisco CCNP Collaboration 350-801 CLCOR exam, just choose the ITExamShop Cisco 350-801 practice exam questions as the preparation materials. The professional specialists will guide you really properly and get the most beneficial information from the updated 350-801 exam questions.

Read Cisco CLCOR 350-801 Free Demo To Check The Updated 350-801 Practice Questions V19.02

Page 1 of 3

1. Which access control group is required on an end user to allow Jabber to do deskphone mode?

Standard CTI Enabled

Standard CTI Allow Reception of SRTP key Material

Allow control of device from CTI

Standard CTI Secure Connection

2. How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Configure a calling party transformation pattern that keeps only last 10 digits.

Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXX

On the inbound SIP trunk, change Significant Digits to 10.

Change the service parameter Apply Transformations On Remote Number to True.

3. Which configuration on Cisco Unified Communication Manager is required for SIP MWI to work?

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.

Assign a MWI extension on the mailbox.

The line partition must be inside the rerouting CSS assigned to the Cisco assigned to the Cisco unity connection SIP trunk.

Set the "Enable message waiting indicator" on the port group.

4. An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager.

Which action should be taken when building a variable-length route pattern?

Configure single route pattern for international calls

Reduce the T302 timer to less than 4 seconds

Create a second route pattern followed by the # wildcard

Set up all international route pattern to 0.1

5. Refer the exhibit.

Given this "debug isdn q921" output, what is the problem with the PRI?

Layer 1 is down on the controller.

PRI does not have an IP address configured on the interface.

Noting, the PRI is sending keepalives.

Layer 2 is down on the controller.

6. When a new SIP phone is registered to Cisco Unified communications Manager, it keeps failing and showing an "unprovisioned" error message in the phone display.

Which problem is a possible cause of this issue?

Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone device does not have a DN configured.

The DHCP settings are incorrectly and the phone does not have an alternate TFTP defined.

The phone cannot download and install the latest firmware.

The DN assigned to the phone is already in use by another SIP phone.

The DN configuration for this phone is shared with SCCP phone, which is not supported.

7. An engineer is designing a high availability and failover solution for two Cisco Unified Border Element routers. The first router (cube 1.abc.com) takes 60% of the calls and the second router (cube2 abc.com) takes 40% of the calls. Assume all DNS A records have been created.

Which two SRV records are needed for a load balanced solution? (Choose two.)

_sip_udp.abc.com 60 IN SRV 1 60 cube1.abc.com

_sip_udp.abc.com 60 IN SRV 1 40 cube2.abc.com

_sip_udp.abc.com 60 IN SRV 60 1 cube1abc.com

_sip_udp.abc.com 60 IN SRV 2 60 cube1.abc.com

_sip_udp.abc.com 60 IN SRV 3 60 cube2.abc.com

8. An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager.

Which phone type must be selected?

Cisco Dual mode for Android

Cisco Unified Client services Framework

third-party SIP device

Cisco Dual Mode for iPhone

9. what causes poor voice quality and video pixelization in a video call?

Cisco Unified Communications Manager is configured to use

711 instead

729.

1 Gbps network ports are used instead of 100 Mbps network ports.

The QoS is configured incorrectly.

A firewall is blocking the RTP ports.

10. As a voice engineer, which two recommendations do you make to your company to optimize Cisco Unified Communications Manager configuration to reduce the number of toll fraud incidents? (Choose two.)

Inbounds CSS on any gateway typically should have access to internal destinations only and not PSTN destinations.

Classify all route patterns as on-net and prohibit on-net to on-net call transfers in Cisco Unified CM service parameters.

Classify all route patterns as on-net or off-net and prohibit off-net call transfers in Cisco Unified CM Service parameters.

Inbound CSS on any gateway typically should have access to internal destinations and PSTN destinations.

Classify all route pattern as off-net and prohibit off-net to off-net call transfers in Cisco Unified CM service parameters.

Page 2 of 3

11. A customer wants a video conference with five Cisco TelePresence IX5000 series system.

Which media resource is necessary in the design to fully utilize the immersive functions?

Software conference bridge on Cisco Unified Communications Manager

Cisco PVDM4-128

Cisco Webex meetings server

Cisco meeting server

12. How are E.164 called-party numbers normalized on a globalized call-routing environment is Cisco Unified Communications Manger?

Normalization is achieved by stripping or translating the called numbers.

Call ingress must be normalized before the call being routed.

Normalization is not required

Normalization is achieved by setting up calling search and partitions at the SIP trunk for PSTN connection.

13. A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronize User in Cisco Unified Communications Manager.

Which step is next to remove this user from Cisco Unified Communications Manager?

Restart the Dirsync service after the user is deleted from LDAP directory.

Delete the user directly from Cisco Unified Communications Manager.

Wait 24 hours for the garbage collector to remove the user.

Execute a manual sync to refresh the local databased and delete the end user.

14. Refer to the exhibit.

Which option describes the security encryption status of this active call on a Cisco IP phone?

unencrypted call signaling and media

encrypted call signaling but unencrypted call media

encrypted call media but unencrypted call signaling

encrypted call signaling and media

Not enough information provided to answer this question.

15. Which two protocols does Cisco IM and Presence use to authenticate Jabber? (Choose two.)

TCP

SOAP

AXL

XMPP

QBE

16. Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

Pattern usage, IPv4 pattern, IPv6 pattern, and description

Pattern usage, IPv4 pattern, and SIP trunk/Route list

Pattern usage, IPv6 pattern, and SIP trunk/Route list

SIP trunk/Route list, description, and IPv4 pattern

17. Calls are being delivered to the end user in the globalized format.

Where does an engineer configure the calling number into a localized format?

gateway

route pattern

IP phone

service parameters

18. Which two functionalities does Cisco Expressway provide in the Cisco collaboration architecture? (Choose two.)

Survivable Remote site Telephony functionality

Secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence video endpoints

Customer interaction management services

Secure business-to-business communications

MGCP gateway registration

19. Which issue can occur if QoS is not Deployed on a Cisco Collaboration architecture across the WAN?

Unexpected shut-down on Cisco Unified Communications Manager

Packet fragmentation

403 Forbidden errors on SIP calls

Excessive jitter

20. An incoming off-net call to a user fails. An engineer notices that the off-net call is G.711, but the phone accepts only G.729.

Which media resource on a Cisco Unified Border Element and Cisco Unified Communications Manager must the engineer configure to Manage the engineer configure to manage the codec negotiation?

CFB

transcoder

MTP

MOH

Page 3 of 3

21. Which design restriction applies to Cisco Unified Communications Manager Session Management Edition clustering over the WAN deployment with extended round-trip times in Cisco Unified CM 9.1 and later releases?

SIP and

323 intercluster trunks are supported.

Only SIP trunk is supported.

SIP trunks and

323 gateways are supported.

A minimum of 1.544 Mb/s bandwidth is required for all traffic between any two nodes in the cluster.

Only RSVP agents can be configured and registered to the SME cluster as media resources.

22. Which description of the Mobile and Remote Access feature is true?

Collaboration Edge feature that enables remote individuals to perform international calls from Jabber with a VPN connection

Collaboration Edge feature that enables remote individual to access enterprise collaboration services via Jabber with the use of a VPN connection

Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection

Collaboration Edge feature that enables remote individuals to access all enterprise collaboration services using a PC within the corporate environment

23. Which transport protocol does the application layer protocol SNMP use?

HTTP

XML

UDP

SIP

24. Which configuration step is necessary for a Cisco SIP phone to synchronize its time with a specific source?

Change the Time Zone from "America/Los_Angeles" to "Etc/GMT+8".

Add a phone NTP Reference to the date/time Group.

Assign the device to the correct region.

Change the time format from 24-hour to 12-hour.

25. Which description of the function of call handlers in Cisco Unity Connection is true?

They control outgoing calls by allowing you to specify the numbers that Cisco Unity Connection can dial to transfer calls, notify users of massages, and delivery faxes.

They collect information from callers by playing a series of questions and recording the answers.

They answer calls, take message, and provide menus of options.

They provide access to a corporate directory by playing an audio list that users and outside callers users and leave messages.

26. Why would we not include an end user's PC device in a QoS trust boundary?

The end user could incorrectly tag their traffic to bypass firewalls.

There is no reason not to include an end user's PC device m a QoS trust boundary

The end user may incorrectly tag their traffic to be prioritized over other network traffic

The end user could incorrectly tag their traffic to advertise their PC as a default gateway.

27. You are adding regions in Cisco Unified Communications Manager.

Which codec(s) are selected when a call is placed if you set up the max audio bit rate to use 8 kbps?

722

729

729 and

711ualw

711ulaw and

711alaw

28. An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit had reverted to its previous version.

What must the administrator do to prevent this from happening again?

Confirm the phone load name in the phone configuration.

Set the prepare cluster for rollback to pre-8.0 enterprise parameter to true.

Assign a universal device template to the phone.

Assign a phone security profile with secure SI

Welcome To Choose Required IT Certification Exams Online

Cisco CLCOR Exam 350-801 Practice Questions Updated (V19.02) To Be Your Good Preparation Materials

Read Cisco CLCOR 350-801 Free Demo To Check The Updated 350-801 Practice Questions V19.02

Author