Latest NCP-MCI-6.5 Exam Questions: Your Nutanix Certified Professional-Multicloud Infrastructure (NCP-MCI) 6.5 Exam

Regina2023-02-16T06:30:15+00:00

The Nutanix Certified Professional-Multicloud Infrastructure (NCP-MCI) 6.5 Exam NCP-MCI-6.5 test is available to validate your skills and abilities to deploy and manage virtual infrastructure components and VMs, perform operational maintenance tasks, and initiate disaster recovery. To pass this NCP-MCI-6.5 exam, you need to be familiar with the actual exam questions. The latest NCP-MCI-6.5 exam questions of ITExamShop are the perfect preparation materials for the Nutanix Certified Professional-Multicloud Infrastructure (NCP-MCI) 6.5 Exam NCP-MCI-6.5 certification test. These questions and answers will help you understand the format and structure of the actual exam, and to provide you with the knowledge and skills you need to get success.

It is good for you to check the free Nutanix NCP-MCI-6.5 exam demo questions:

Page 1 of 2

1. What is most likely the cause of this issue?

There is a firewall rule blocking VLAN512 traffic

VLAN512 is a reserved VLAN ID, and not usable for guest VMs.

The VLAN was not created on the upstream switches.

The administrator did not created the VLAN on all hosts

2. An administrator needs to create a new Linux image and will to do the following as part of the VM deployment:

* Set the OS hostname

* Add custom users

* Add keys

* Run custom scripts

What package needs to be installed in the Linux image to facilitate this automation?

CloudInit

Sysprep

3. Which scenario would benefit most from Erasure Coding being enabled on a container?

Long term storage of data which is written once and read infrequently

High performance database where all is relatively hot.

VDI use cases where a single VM is cloned 100’s of times

WEB and API Servers

4. On a Nutanix cluster, what does Network Segmentation refer to?

A distributed firewall for security VM to VM traffic.

Physically separating management traffic from guest VM traffic.

Isolating intra-cluster traffic from guest VM traffic.

Isolating management traffic from storage replication traffic.

5. What is a requirement to enable Flow Neworking?

A dedicated virtual switch has been created for Flow Networking.

Flow Micro segmentation must be enabled.

Microservices infrastructure must be enabled.

Prims Central is using a three-node scale-out deployment

6. What does Nutanix recommend when setting up the node networkring?

Include NIC models from different vendors in the same bond

Include at least two physically interfaces in every bond.

Combine NIC models from different vendors in the same bond.

7. An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.

Which service needs to be configured?

SMTP

DNS

SNMP

NTP

8. An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:

Four blocks

One node per block

Will the administrator be able to accomplish these tasks?

No-Fault tolerance changes are not supported.

Yes-FT2 requires a minimum of three nodes.

Yes-Block awareness requires a minimum of three blocks.

No-FT2 requires a minimum of five nodes.

9. An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.

Which initial step was missed during the post process cluster configuration?

Setting the cluster time zone via PC GUI

Setting the cluster time zone via CVM NCLI

Setting the cluster time zone via PE GUI

Setting the cluster time zone via CVM ACLI

10. Which two types of granular RBAC does Nutanix provide for AHV hosts? (Choose two.)

Category based

Project based

Disk based

Cluster based

Page 2 of 2

11. What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?

5 Minutes

10 minutes

30 minutes

60 minutes

12. A recently configured cluster is leveraging NearSync with a recovery schedule of 15 minutes. It is noticed that the cluster is consistently transitioning in an Out of NearSyne.

What action should be taken to potentially address this issue?

Increase network bandwidth

Change the NearSync schedule to 30 minutes.

Add a vCPUs to the user VMs.

Configure a secondary schedule in the same Protection Domain.

13. Refer to the exhibit.

Which two initial cluster configuration tasks were missed during the deployment process? (Choose two.)

Host password changes

Password policy changes

BIOS password changes

CVM password changes

14. An administrator needs to increase bandwidth available to the AHV host and to the CVM.

How should the administrator complete this task?

In Prism, update vs0 to change the configuration to Active-Active.

Use manage-ovs commands to update br0 change the configuration to Active-Active.

In Prism, create a vsl interface and add any remaining uplinks.

Use manage-ovs commands to create br1 and add any remaining uplinks

15. Which capability refers to the storage of VM data on the node where the VM is running and ensure that the read I/O does not have to traverse the network?

Intelligent Locally

Data Locality

Intelligent Tiering

Data Tiering

16. Which inefficient VM Profile can be used to identify a VM that consumes too many resources and causes other VMs to starve?

Over-provisioned VM

Inactive VM

Bully VM

Constrained VM

17. An administrator has an AHV cluster that is comprised of 4 nodes with the following configuration in each node:

CPU:2 each 2.4GHz, 12 core

Memory: 256GB

Disk: 6 each 1.92 SSD

A VM with 16 vCPUs and 96GB of RAM is being created on the cluster.

How should the administrator configure the VM to assure optimal performance?

With an affinity policy

With memory overcommit

With 2 vNUMA nodes

With Flash Mode enabled

18. An administrator manages an AHV cluster that is dedicated to a dev/test environment. The administrator receiving complaints from users that they are unable to create new VMs on the cluster.

After the reviewing the cluster, the administrator finds that the memory resources are almost fully utilized, with many VMs over-provisioned on memory.

What option is the most efficient resolution to enable additional VMs to be created?

Enable Memory Overcommit on the over-provisioned VMs.

Enable Memory HA on the over-provisioned VMs.

Upgrade the nodes with additional memory DlMMs.

Disable HA Reservation on the cluster.

Welcome To Choose Required IT Certification Exams Online

Latest NCP-MCI-6.5 Exam Questions: Your Nutanix Certified Professional-Multicloud Infrastructure (NCP-MCI) 6.5 Exam

It is good for you to check the free Nutanix NCP-MCI-6.5 exam demo questions:

Author