Real HPE Storage Solutions HPE0-J68 Practice Exam Questions

Regina2021-07-29T08:56:52+00:00

Real HPE Storage Solutions HPE0-J68 practice exam questions from ITExamShop are great to help you complete HPE Certified HPE0-J68 exam successfully. HPE0-J68 exam mainly tests that you are able to size, design, install, configure, optimize, upgrade, manage, monitor, troubleshoot, and maintain HPE storage solutions. Real HPE0-J68 practice exam questions ensure that you can learn all the exam objectives. The high-coveraged HPE0-J68 exam questions are the key resource. Just read HPE0-J68 exam questions and answers to prepare for HPE Storage Solutions exam well.

HPE Storage Solutions HPE0-J68 Free Exam Questions

Page 1 of 3

1. Users are complaining about poor performance with their Data Warehouse application.

What is an effective solution to increase their performance at minimal cost?

HPE 3PAR Adaptive Flash Cache

HPE 3PAR Priority Optimization

HPE 3PAR Dynamic Optimization

HPE 3PAR Adaptive Optimization

2. Which statement describes HPE StoreVirtual Network RAID functionality?

Redundancy is managed on a per-volume basis.

With Network RAID 10+2 data is striped and mirrored across two or more storage systems.

Network RAID 10 requires an even number of storage nodes.

Volumes remain available if an odd number of nodes are available.

3. A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.

What is the reason to propose HPE CloudBank?

To easily move workloads to AWS or Azure in the event of site disaster.

To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR and StoreOnce.

To regularly send backups to the cloud for the purposes of DR protection.

To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.

4. An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.

Which HPE license is required to meet the customer’s technical requirements?

Intelligent Resilient Framework licenses

HPE StoreOnce Replication

Extended Fabric

HPE 3PAR Remote Copy

5. A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?

Quality of services

Enhanced group management

Frame filtering

Traffic isolation Zones

6. What are two advantages of HPE Recovery Manager Central? (Select two.)

Enables automatic transparent failover

Less expensive than traditional backup

Includes Peer Copy asynchronous replication

Manual data provisioning and policy-based copy protection

Integration capabilities utilizing HTML

7. A customer need a new storage system for visual desktop infrastructure environment to

reduce the time required to provision new desktop.

Which HPE solution should you recommended to fulfill this customers requirements?

Snapclones on HPE MSA 2040

SmartClone on HPE store virtual VSA(54)

Storage pool on HPE store Easy

Virtual Copy on HPE 3Par storeServ

8. A customer currently has a CS1000H and wants to upgrade to a CS3000.

What must be considered before upgrading?

This upgrade is disruptive and needs planned downtime.

A capacity upgrade to a fully populated array has to be performed first.

Timeless storage support is not offered for CS1000H entry-level systems.

A controller upgrade to a CS1000F has to be performed first.

9. You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.

Which statement is correct when discussing the IRF limits for this configuration?

When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.

A maximum of two switches can be used in an IRF stack when connecting storage.

In an IRF stack with storage connectivity, the 40GbE ports cannot be used.

The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.

10. A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.

Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

LACP

NPIV

FSPF

VSF

Page 2 of 3

11. Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

NinjaProtected

NinjaStars

NinjaCrawler

StoreVista

12. A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD’s configured with RAID5 7+1. They plan to add four more 3.84 TB SSD’s.

What needs to be changed on the configuration once the new SSD’s are installed?

Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.

Change the availability level from cage to magazine.

Adjust the cpg growth value to match amount of SSD’s.

Change the cpg setsize to RAID5 5+1 and run tunesys.

13. A customer wants to implement a management and monitoring tool for an HPE B-series SAN switch

environment. You plan to recommend the HPE SAN Network Advisor.

Which information about the customer’s environment will help you to decide which edition to recommend?

FCIP support

Amount of used fabrics

FCoE support

Fabric OS version

14. During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE

SN6000B switches.

Which port mode must be set enable communication between the

switches?

N_PORT

FL_PORT (WRONG)

F_PORT

E_PORT (Correct)

15. Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

Persistent Memory

Persistent port (96)

Peer persistence D Persistent Cache

16. An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak

business hours with an OLTP application. They have enabled tiering using all drive types.

What could be used to resolve the issue?

Dynamic Optimization using tier 2

Adaptive Optimization using tier 1

Dynamic Optimization between tier 0 and tier 1

Dynamic Optimization using tier 1

17. After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC)

configuration and want to raise it from 256 to 768GB.

Which action is needed to take advantage of the new AFC configuration?

Remove flash cache for all VVS then run create Flash cache

Increase current AFC configuration to reflect the additional space

Remove the old AO configuration and recreate a new one

Run tunesys after raising the AFC to take advantage of the additional space

18. What owns the physical drives in an HPE 3PAR StoreServ Express Layout?

a logical disk

a chunklet

a single node

a node pair

19. You are presenting a Nimble solution based on CS3000 hardware to a customer.

Which support advantage will be provided with this solution? (select two)

Customers always interact with a 3rd level support engineer, when needed

Customers only have to deploy a service processor for automating support tasks.

Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.

Infosight performs firmware and software updates without additional administrative support.

20. While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.

Which objects do you need to create to demonstrate these features? (Choose two.)

File share

Storage container

Host

Remote copy group

Virtual file server

Page 3 of 3

21. During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)

Loss of persistent cache

B-series SAN switch upgrades

Firmware upgrade

Node maintenance or failure

Loss of full-mesh cluster interconnect

22. A customer has a SAN infrastructure with the HPE C-class blade Enclosure, and a mix of proliant G7, gen8 and Ge9 server. They require a new storage platform ...

How can you confirm the storage array will be supported in the existing environment?

Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility

Document existing server and SAN information, and consult SPOCK to ensure firmware compatibility

Design and array with the latest firmware, and recommend that the customer engage HPE point Next to upgrade the existing hardware

Design an array with older version of the firmware to ensure compatibility

23. Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer’s current environment?

NinjaCrawler

StoreVista

NinjaThin

NinjaStars

24. What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

The HPE DSM increases availability and reduces latency and throughput.

The storage system, which holds a copy of the requested data, services the read I/Os.

The iSCSI connections are blocked to non-critical nodes in the cluster by default.

The storage system, which receives a copy of the data, does not service the write I/

25. What is the benefits of HPE synergy (Select 2)

It can present block storage services from HPE 3par as part of the resource pool

It support up to 3 HPE store Virtual VSA nodes for storage RAID

It can use HPE 3PAR file persona for objet storage

It can compose and reclaim DAS storage

It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)

26. During Technology workshop, the customer asks about different between converged and fibre channel switches.

What would be a benefits of using flex fabric switches in a fibre channel storage environment?

Support for combining multiple physical switches in to one virtual switch with a single IP address

Support for six Ethernet and two fibre channel, or six Ethernet and two ISCSI or eight Ethernet adapters per server.

Zones can be configured for QoS with high, medium, and low priorities within a fabric on a zone by zone basic

In-flight compression and encryption provides efficient link utilization and security

27. A customer has a SAN based on HPE B-series switches with Gen6 fibre channel technology. Their workload is continually growing and they are experiencing performance issues. They need a solution to enable real-time monitoring and to speed up troubleshooting in his SAN backend.

Which unique feature of the HPE B-series Gen6 switches should you recommend? (Choose two.)

Fabric Watch

MAPS

Advanced Trunking

Fabric Vision

Extended Fabrics

28. You are presenting the HPE StoreEver portfolio to a media agency.

What advantage is offered when using LTFS?

file management capabilities will be provided with tape cartridges

WORM functionality for file, block and object storage access on tape

file encryption with public and private key management

file and block data management within an HPE HSM solution

29. What is used to migrate data between nodes in an HPE StoreVirtual VSA environment?

Network RAID

Peer Motion

SmartClone

Remote Copy

30. A customer is a cloud service provider with infrastructure powered by HPE 3PAR Storeserv 9000.The customer is concern about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants.

What should you recommended to your customer?

Use priority optimization to enable service level for workloads

Use virtual domain to automatically set multi-tenant policies

Use dynamic optimization to automatically manage quality of service

Use adaptive optimization to optimize service level automatically

Welcome To Choose Required IT Certification Exams Online

Real HPE Storage Solutions HPE0-J68 Practice Exam Questions

HPE Storage Solutions HPE0-J68 Free Exam Questions

Author