Updated HPE0-J68 Questions Are Valid For Actual HPE Storage Solutions Exam

Regina2021-11-22T07:51:29+00:00

When coming to ITExamShop, you need to make sure that you have the most updated HPE0-J68 questions as the preparation materials. We have verified that the updated HPE Certified HPE0-J68 exam questions are valid with precise answers for actual HPE Storage Solutions certification exam. The updated HPE Storage Solutions HPE0-J68 practice exam contain 179 questions and answers. You, who have downloaded the ITExamShop updated HPE0-J68 exam questions, are recommended to read the Q&As carefully and need to try to memorize all the HPE0-J68 questions and answers well.

Come To Check HPE Certification HPE0-J68 Free Questions First

Page 1 of 3

1. A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

VTL

CIFS

Catalyst

2. A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

NinjaCrawler

OneView

Recovery Manager Central

Primera on-node management GUI

3. Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

Encryption

Cloud Bank

Catalyst

VTL/NAS replication

Flexible I/O HBAs

4. A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.

Which HPE storage solution should you recommend?

Nimble

Nimble dHCI

Primera

MSA

5. A customer has a VMware environment running vSphere 6.5. They are running DL380 Gen10 servers with HPE 82Q adapters connected through a HPE SN3000B switch to a Nimble HF40. They plan to

upgrade the hypervisor.

What should they use to identify the latest firmware and compatibility information?

SAN Health Diagnostics

SPOCK

OneView

SAN Design Reference Guide

6. Which protocol can be used for accessing StoreOnce VTL target from Veeam?

NFSv4

iSCSI

SMBv3

7. A customer is deploying a new StoreOnce VSA solution.

How can the necessary storage capacity be added to the VSA? (Choose two.)

Verify sufficient capacity LTUs are available

Add a new virtual hard disk to the virtual machine

The Cloud bank container needs to be configured once the VSA boots

The Cloud bank container needs to be configured from the vCenter client

8. A customer has completely virtualized their datacenter with VMware. You propose a SimpliVity solution to replace their aging hardware.

Which SimpliVity features should you emphasize in your presentation? (Choose two.)

It uses native hypervisor management tools for management

It utilizes the Storage Management Utility for management and monitoring

It utilizes a unified ASIC for performance

It includes deduplication and backup capabilities

It provides S3 file access

9. HOTSPOT

You are handing over the installed array to customer. The customer wants to review the amount of HDDs and SSDs in the system.

Click the relevant menu option where the front panel of the head shelf can be visualized.

10. DRAG DROP

Match each address with the associated address type.

Page 2 of 3

11. You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high

availability configured.

Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

No license is required

2-port 10 Gb Ethernet Adapter (NIC) is required

4-port 1 Gb Ethernet Adapter (NIC) is required in each array

RMC 6.2 is required

Target drive type must match source drive type

12. You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.

Which technology can be configured at 3PAR to support forwarding events from the array to the customer’s monitoring application?

IPMI

NTP

SNMPv3

DMI

13. You have proposed that a customer replace their legacy SAN switches with new? -Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.

What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)

It runs in a dedicated JVM

It offers automated SPOCK validation

It runs in a browser

It provides a global View

It provides fine-grain visibility into Storage Fabrics (FC + Ethernet)

14. Which tool is used to provide centralized management of 3PAR and Primera arrays?

SMU

Primera UI

WebUI

SSMC

15. Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)

Presentation Layer

User Management Layer

Security Layer

Data Management Layer

16. Refer to the exhibit.

You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.

Which action will satisfy the customer request?

Add more disks of smaller capacity

Upgrade the HPE Primera base model

Change to larger SSDs

Add more FC Ports

17. A customer wants to make a full copy replica of a database to use for performance testing.

Which technology should they use to create the copy?

deduplication

snapshot

clone

synthetic full

18. HOTSPOT

You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.

Click the appropriate option where the RAID can be selected.

19. You are asked to review an installation plan for a new Primera storage array. The array will go into an existing environment that has been in production for over 4 years.

It includes:

✑ C7000s with Gen8 blades

✑ 8Gb Brocade switches

✑ a 3PAR 7400

✑ an MSA that is used as a backup target

What should you use to find appropriate installation and planning guides?

SAF Analyze and Collector

Information Library

Ninja STARS

SPOCK

20. You are designing a new HPE 3PAR StoreServ solution.

Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

One Config Advanced

SAF Collect

NinjaSTARS

Storage Sizing Tool

Page 3 of 3

21. You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more

than 500GB.

Which technology should you recommend?

DRAM

SRAM

NVMe SCM

NAND SSD

Welcome To Choose Required IT Certification Exams Online

Updated HPE0-J68 Questions Are Valid For Actual HPE Storage Solutions Exam

Come To Check HPE Certification HPE0-J68 Free Questions First

Author