Why Choose 350-501 SPCOR Practice Test From ITExamShop?

Regina2021-08-11T06:42:34+00:00

By Regina CCNP Service Provider, Cisco, Free Questions Online 350-501, 350-501 free questions, 350-501 practice exam, 350-501 practice test

Cisco 350-501 SPCOR practice test from ITExamShop with real exam questions and answers should be the best study materials to prepare for Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) certification exam. Why choose 350-501 SPCOR practice test? We have collected the real Cisco 350-501 SPCOR exam questions based on the exam objectives. As the core exam of CCNP Service Provider certification and the qualify exam of CCIE Service Provider, 350-501 SPCOR exam focuses on your knowledge of service provider infrastructure. ITExamShop 350-501 practice exam are the great online resource, which help you test your skills in knowledge of implementing core service provider network technologies. No need to worry about Cisco 350-501 exam, just get the great 350-501 practice exam to make sure you can pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam in the first attempt.

CCNP Service Provider 350-501 SPCOR Free Questions Are Online For Checking

Page 1 of 3

1. Refer to the exhibit.

A network engineer Is implementing OSPF multiarea .

Which command on interface 60/1 resolves adjacency Issues in the new area?

Ip ospf network broadcast

ipospf network non-broadcast

Ip ospf network polnt-to-multlpolnt

aip ospf network point-to-point

2. CORRECT TEXT

A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any change in the LSA .

Which command enables this feature?

3. Refer to the exhibit.

An engineer is trying to implement BGP configuration on a router .

Which configuration error prevents the ASBR from establishing a BGP neighborship to a directly connected BGP speaker?

The routing policy is absent for this Cisco IOS XR eBGP instance.

The IPv4 address family configuration under neighbor configuration-mode must be removed.

The VPNv4 address family interferes with the 8GP IPv4 address family negotiations.

The TCP session parameters are not specified.

4. Which additional feature does MPLS DiffServ tunneling support?

matching EXP and DSCP values

PHB layer management

using GRE tunnels to hide markings

interaction between MPLS and IGP

5. Which service is a VNF role?

Compute

Network

Storage

Firewall

6. Refer to the exhibit.

After implementing a new design for the network, a technician reviews the pictured CLI output as part MOP .

Which two outcomes will be technician ascertain from the impNull output? (Choose two.)

Label 0 is used for the prefix displayed but will not be part of the MPLS label stack for packets destined for 192 168.10.10.

Ultimate Hop Popping is in use for the prefix displayed.

Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10

Penultimate Hop Popping is in use for the prefix displayed

Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10

7. Which module refers to the network automation using Ansible?

the losxr_command module to issue run commands on remote devices

the losxr_system module to collect facts from remote devices

the losxr_logging module to run debugging for severity levels 2 to 5

the iosxr_user module to manage banners for users in the local database

8. Which task must be performed first to Implement BFD in an IS-IS environment?

Disable Cisco Express Forward.ng on all interfaces running routing protocols other than IS-IS

Configure BFD under the IS-IS process

Configure all ISIS routers as Level 2 devices

Configure BFD in an interface configuration mode

9. A network operator needs to implement PIM-SSM multicast configuration on customer's network so that users in different domains are able to access and stream live traffic .

Which two actions must the engineer perform on the network

to make the streaming work? (Choose two.)

Configure at least one MSDP peer on the network.

Enable IGMP version 2 at the interface level.

Enable PIH sparse mode on the device.

Enable IGMP version 3 at the interlace level.

Enable PIM dense mode on the device.

10. Refer to the exhibit.

An engineer configured BGP summarization on a customer's network .

Which route is advertised to BGP peers?

192.0.0.0/16

192.168.0.0/16

192.168.1.0/24

192168.0.5/30

Page 2 of 3

11. Refer to the exhibit.

A network engineer notices that router R2 is failing to install network 172.16.33.1/32 in the routing table .

Which configuration must the engineer apply to R2 to fix the problem?

R2(config)# access-list 1 permit 172.16.33.0 255.0.0.0

R2(condg)# access-list 1 permit 172.16.33.0 255.255.255.0

R2(config)# access-list 1 permit 172.16.33.0 0.0.0.255

R2(condg)# access-list 1 permit 172.16.33.0 255.255.0.0

12. Refer to the exhibit.

A network engineer is configuring MPLS LDP synchronization on router R1 .

Which additional configuration must an engineer apply to R1 so that it will synchronize to OSPF process 1?

Option A

Option B

Option C

Option D

13. After analyzing the network environment, an engineer decides to implement a full separation model for internet access and MPLS L3VPN services .

What is the reason for this decision?

It enables you to choose whether to separate or centralize each individual service.

It is easier to manage a system in which services are mixed

It requires only one edge router

It enables EGP and IGP to operate independently

14. Refer to the exhibit.

Which two topology changes happen to the IS-IS routers? (Choose two.)

All four routers are operating as Level 1 routers only.

All four routers are operating as Level 2 routers only.

R1 and R4 are Level 2 neighbors.

R1 and R2 are Level 2 neighbors.

All four routers are operating as Level 1-2 routers.

15. Refer to the exhibit.

Router 1 and router 2 are running OSPF Area 0. The router logs on both routers show that the LDP link has flapped .

Which configuration must the engineer apply to the two routers to implement session protection on the link?

A)

Option

16. When configuring traffic engineering tunnels in Cisco MPLS core network, a network engineer sees the traffic is not taking the expected path in the core .

Which command must the engineer use to quickly check path of a TE tunnel?

Ping <tunnel destination IP>

traceroute mpls ipv4 <tunnel destination>

show mpls traffic-engineering tunnels

traceroute <tunnel destination IP>

17. Refer to the exhibit.

An engineer is securing a customer's network .

Which command completes this configuration and the engineer must use to prevent a DoS attack?

neighbor ebgp-multihop

ebgp'multihop

ttl-security

neighbor ttl-security

18. Refer to the exhibit.

A network administrator implemented MPLS LDP changes on PE-A LSR device. The engineer must ensure there are no LDP peer are fully operational .

Which LDP feature must the engineer apply to the existing configuration to eliminate the problem?

Configure MPLS LDP IGP synchronization on the network.

Configure MPLS LDP NSR for all LDP sessions.

Enable LDP session protection under the routing protocol.

Disable IP CEF on routers LDP and enable

19. Refer to the exhibit.

Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?

show Ip traffic

show ip interlace brief

show ip interface

show cef Interface

20. Which QoS model allows hosts to report their QoS needs to the network?

DiffServ

IntServ

CB-WFQ

MQC

Page 3 of 3

21. BGP has been implemented on a IOS XR router .

Which configuration sends BGP IPv4 labels to build inter-domain LSPs?

router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community extended

router bgp 65515 no bgp default ipv4-unicast

router bgp 65515 address-family ipv4 unicast neighbor 172.16.70.23 send-community

router bgp 65515 neighbor 172.16.70.23 address-family ipv4 labeled-unicast

22. Which type of attack is a protocol attack?

HTTP flood

TFTP flood

SYN flood

Slowloris

23. DRAG DROP

Drag and drop the message types from the left onto the target field of the message originator on the right.

24. Refer to the exhibit.

An engineer is reviewing the BGP configuration .

Which router must be advertised to 10.10.10.1?

Refer to the exhibit. An engineer is reviewing the BGP configuration.

Which routes must be advertised to 10.10.10.1

Local routes are permitted, and routes from other ASNs are denied.

All routes whether local or from other ASNs are denied.

Local routes are denied, and routes from other ASNs are permitted.

All routes whether local or from other ASNs are permitted.

25. Which two tasks must an engineer perform when implementing LDP NSF on the network? (Choose two.)

Disable Cisco Express Forwarding.

Enable NSF for EIGR

Enable NSF for the link-state routing protocol that is in use on the network.

Implement direct connections for LDP peers.

Enable NSF for BG

Welcome To Choose Required IT Certification Exams Online

Why Choose 350-501 SPCOR Practice Test From ITExamShop?

CCNP Service Provider 350-501 SPCOR Free Questions Are Online For Checking

Author